Fully Automatic Centering Plunge Facing Machine
Model - CFAM-500-1000
- ✔ Toughened Guide ways of Machine Bed
- ✔ Slide Feed Head Stocks
- ✔ High Productivity
Details
This machine is very useful in the after-cutting processes of rods. The centering plunge facing machine is used to make the cut rod smooth & equal as these rods when cut into pieces are not smooth & equal.
Specifications
Admitted work length | 40 mm |
with Single vice min | 110 mm |
with Double vice min | 500 mm |
Min. job dia. clamped in vice | 15 mm |
Max. job dia. clamped in vice | 125 mm |
Job Clamping system | Self Centering vice by Hydraulic motor force 2000 kg. |
Rapid Travel Speed | 4200 mm/min |
Spindle speeds | 750, 1000 RPM |
Max. Stroke of Slide | 50 mm |
Slide Feeding | Infinitely variable with hydraulic. |
Max. Plunge face Diameter | 63 mm |
Centre Drill Sizes | BSS3 TO BSS6/as per ISI |
Total Machine Power | 10.15 H.P |
Spindle Power | 3 H.P/each |
Hydraulic Motor Power | 3 H.P |
Coolant Motor | 0.15 H.P/40 lpm |
Overall Size LxWxH | 2000 / 1300 / 1600 |
Machine Weight | 1250 Kgs. |
Additional Information
Head Stock :
Two Spindles are supporated by two taper roller bearigs at both sides. Both head stock are slide feed by Hydraulic. One head stock permanently fixed & other is adujustable to accommodate different job length. Drive is by timing belt. Change of speeds is changing timing pulley.
Tool Holders :
Facing tools are indexable insert type. Centre drill holders is used to hold and adjust centre drill. Depending on application, Chamfering, O.D. Turning, tools can be supplied.
Vices :
The job is clamped by to self centering vice assy. (LH/RH scres with G.M.T nut / V-flat Jaws.) The vice screw are rotated by hydraulic motor.
Machine Bed and Rack Pinion system : :
The box and cross ribbed bed with toughened guide ways ensures rigidity of machine bed. Rack and pinion systems is given to adjust vice assy, adjustable headstock to required length.