• post
    An ISO 9001 Certified Company ISO 9001 Certified

    ISO 9001 Certified

High Speed Vertical Bandsaw Machine

Model - VT 350SA

  • ✔ Manual is Hydraulic Semi auto is rigid
  • ✔ Heavy Duty, High Speed Machine
  • ✔ Blade is guided by tungsten Carbide wear pads & Hardened Guide rollers to improve the blade life.
  • ✔ The machine is suitable for cutting Rrisers, Runners of Casting, Certical Space Plates, Round, Hex Squre of all types of materials & even Angular cross section
  • ✔ Bandwheels are Graded C.I. material.
  • ✔ The Speed Reduction is given through High Power Transmission Gear box.

Details

Our company is engaged in the manufacturing of semi-automatic Bandsaw machine, which is used for cutting steel rods. Serving the industries like, automobile industry & automobile vendors, this machine is all set up, but some functions have to be done manually too. The standard specifications can be summarized as follows

Specifications

Cutting depth 350 mm
Maximum cutting height 350mm.
Work piece cutting length 500mm
Blade Size 3760 x 27 x 0.9mm.
Blade Speed 30, 44, 66m / min
Drive Motor HP 2 HP LHP make
Hydraulic motor HP 1 HP LHP make
Coolant motor HP 0.12 HP Rajmane make
Gear Box Greaves make
Electrical Bhartia cuttler Hammer

Additional Information

Vertical saw Head :

Vartical Saw Head is Supported by two Rigid Induction hardned & Hard Chrome plated & ground columns. Blade tensioning is done by Manual / Hydraulically operated cylinders. Auto Hight sensor optimizes ideal position of blade with least down time.

Saw Feed :

Vartical Saw Head up down motion is controlled by two Hydraulic cylinders. Feed for various material is regulated by temperature & pressure compensated flow control valve. FFC valve is provied to control the cutting pressure required for various types of materials & different tensile strength & BHN.

Clamping :

Clamping of job is done by hydraulically operated vice Jaws. Fixed vice jaws are perpendicular to the blade. The moving vice clamps the job with sufficient work pressure. For tube cutting variable vice pressure will be provied as optional accessories.

Accuracy :

Taper 0.1 mm for 100 mm.

Band Wheels :

Drive & Driven band wheels with optimum centre distance gives smooth blade twisting force which results in excllent performance of blade.

Standard Equipments
  • ■ Complete electrical equipment with panel board, limit switch & electric motors
  • ■ Complete hydraulic system with Yuken make DC valve.
  • ■ Coolant System with pump and piping.
  • ■ Power driven chip brush for easy chip removal from blade.
  • ■ One M42 grade bimetal blade.
  • ■ Operation tools & spanners.
Band Wheels :
  • ■ Chip Brushes
  • ■ Roller table 1500 mm
  • ■ Bimetal Bandsaw blade
  • ■ Variable vice pressure
  • ■ Variable-frequency Drive.